Suzuki V-Strom (VStrom) Owners Club DL250, DL650, DL1000 & DL1050

Oily Rag - Dedicated to Pat, Greywolf. 26/06/45 - 04/06/18 => Screens => Topic started by: stonehenge on September 27, 2021, 10:47:08

Title: Givi D3117ST on the v Strom 1050
Post by: stonehenge on September 27, 2021, 10:47:08

This screen gets a rough press due to it being tall, which it is.  However, the shaping, width and quality are fine.  It also looks much better than a Givi Airflow.  I cut off just under 10cm from mine and this made all the difference, I also angled it back slightly with a half inch spacer on the two bottom bolts.

I also made a MRA type wing with the remaining top portion and spaced this a half inch from the main screen, parallel to it.  All my previous MRA and PUIG Touring screens with these "wings", I have placed parallel to the main screen and is a great addition to disturb the air as it passes over the screen and reduces buffeting by the time it hits the rider. 

Bit of a faff I know and as I bought my D3117ST used for £50, though it was worth the risk - which has paid off. 

Title: Re: Givi D3117ST on the v Strom 1050
Post by: stonehenge on September 27, 2021, 12:36:05

Pix:

https://photos.app.goo.gl/88aL3ghcYbyMVDw56