Suzuki V-Strom (VStrom) Owners Club DL250, DL650, DL1000 & DL1050

V-Strom specific discussion => V-Strom specific discussion => Topic started by: motorworks on March 25, 2017, 23:48:30

Title: WIRING diagram
Post by: motorworks on March 25, 2017, 23:48:30

Hi
Looking for (again) a wiring diagram for 2008 Vee Strom 1000
Canadian model ...I have a a couple now including one from the dealer
but they do not match up .
The wires from my gear position indicator are
 Red,Blue, and Black. The wire 3 main / heavy wires from the generator are   Black.
anyone with any info please let me know ...summer is coming fast and its short here in NL
 :)
eddie
 

Title: Re: WIRING diagram
Post by: Fat Rat on March 25, 2017, 23:52:34

Have a look at http://www.v-strom.co.uk/downloads.htm

Title: Re: WIRING diagram
Post by: greywolf on March 26, 2017, 02:50:05

The wires from the gear position switch are blue, pink and black with a white stripe and have been that way in all countries. Any chance you mistook pink for red and missed the white stripe which could be on the back of the black wire you looked at?

The AC wires from the stator have been either all yellow or all black. Individual stators could be either. Until you posted this question, I never noticed all the diagrams showed them as yellow. Are you looking at anything specifically other than what you just mentioned? You aren't likely to find anything different.

The book I have is for the 2009 model which includes the 2005 diagram as the latest issued. No changes were made in the wiring diagram from 2005 to 2009. The country codes listed on the 2005 diagram are E-03 (USA except California), E-24 (Australia), E-28 (Canada) and E-33 (California).

Title: Re: WIRING diagram
Post by: motorworks on March 26, 2017, 23:22:16

Thanks Greywolf
And yes I'm red / green colour blind .....got my wife to check the colours and you are right
I have several other small considers , but no heat in the new garage yet and its -15C with
the wind tonight ;( so It will be later the week...
Mainly the aftermarket rectifier colours do not match up ...
Ill be back
all the best
eddie

Title: Re: WIRING diagram
Post by: motorworks on March 28, 2017, 00:00:10

OK
Getting my better half to check all colours from here in ....
My new rectifier has 3 Black wires which connects to the 3 black from the generator.
But it has four other wires . 2 Black with white stripes and 2 red with black stripes.
The wiring diagram shows only two wires... A red and a Black/white.
Does rectifier have a double output and does the red match the red with a black stripe and the black match the black with a white stripe ?
all the best
eddie   

Title: Re: WIRING diagram
Post by: greywolf on March 28, 2017, 01:36:45

That's exactly it.

Title: Re: WIRING diagram
Post by: motorworks on March 28, 2017, 10:16:52

Thanks GW !

 :thumb: