Suzuki V-Strom (VStrom) Owners Club DL250, DL650, DL1000 & DL1050

Oily Rag - Dedicated to Pat, Greywolf. 26/06/45 - 04/06/18 => Accessories and After Market items => Topic started by: doboy on January 19, 2017, 17:52:38

Title: fitting baglux tank cover ?
Post by: doboy on January 19, 2017, 17:52:38

 can anyone tell me how the front of a baglux tank cover fits on to those two bolts on the side of the tank on my 2012 model please ?   

Title: Re: fitting baglux tank cover ?
Post by: Rusty Nuts on January 19, 2017, 18:11:25

Try pm'ing Arto on here. This is his........


(http://farm9.staticflickr.com/8085/8492335986_73246cd070_k.jpg)

found at:
http://www.v-strom.co.uk/smf/index.php?topic=16770.0

Title: Re: fitting baglux tank cover ?
Post by: Mystrom on January 20, 2017, 00:36:48

Hi. You need to loosen the bolts a bit then pull the tank cover on to the tip of the now loose plastic. Then retighten the bolts through the holes in the tank bag.
If you look on the underside of tankbag, where the hole for the bolts are, there is a small pocket that fits over the plastic like a sock.
Mystrom

Title: Re: fitting baglux tank cover ?
Post by: doboy on January 20, 2017, 09:18:58

thank you MYSTROM, easy when you explain it , but a bugger to work out without instructions ...thanks again... :thumb: