« previous next »
Pages: [1]   Go Down

Author Topic: Licence light cover  (Read 545 times)

0 Members and 1 Guest are viewing this topic.

Offline pichulec

  • Member
  • ***
  • Joined: Dec 2017
  • Posts: 1007
  • Bike: KTM 1290 SAS
  • Location: Luton / Bedfordshire
Licence light cover
« on: May 25, 2023, 13:36:35 »
Broke when unscrewing rusty nuts to change a bulb. If anyone have it I will appreciate if you let me know.
Logged

Offline UK_Vstrom650

  • Member
  • ***
  • Joined: Jun 2012
  • Posts: 6592
  • Bike: DL650A L2
Re: Licence light cover
« Reply #1 on: May 25, 2023, 13:49:52 »
This is the worst design I've ever come across. Pain in the **** whenever you need to change it.
I think it's a common part across a few bikes so ebay will be worth a look if no-one here has a spare.
Logged

Offline pichulec

  • Member
  • ***
  • Joined: Dec 2017
  • Posts: 1007
  • Bike: KTM 1290 SAS
  • Location: Luton / Bedfordshire
Re: Licence light cover
« Reply #2 on: May 25, 2023, 14:11:49 »
Completely agree on that. Poor design. I will try to glue the bolt back in using jb weld. If that doesn't help I will drill through and use  the bolt from outside..
Logged

Offline pichulec

  • Member
  • ***
  • Joined: Dec 2017
  • Posts: 1007
  • Bike: KTM 1290 SAS
  • Location: Luton / Bedfordshire
Re: Licence light cover
« Reply #3 on: May 25, 2023, 18:24:52 »
Temporary surgery done, waiting for donor 🤣
Logged

Offline pichulec

  • Member
  • ***
  • Joined: Dec 2017
  • Posts: 1007
  • Bike: KTM 1290 SAS
  • Location: Luton / Bedfordshire
Re: Licence light cover
« Reply #4 on: May 25, 2023, 22:06:17 »
Quite nice alignment 🙂
Logged

Offline pichulec

  • Member
  • ***
  • Joined: Dec 2017
  • Posts: 1007
  • Bike: KTM 1290 SAS
  • Location: Luton / Bedfordshire
Re: Licence light cover
« Reply #5 on: May 29, 2023, 20:31:28 »
JB Weld holding very well, however if ever anyone have this, please let me know :)
Logged
Pages: [1]   Go Up
« previous next »