Author Topic: DL1000 front wheel non-ABS  (Read 769 times)

0 Members and 1 Guest are viewing this topic.

Offline Andy52

  • Member
  • ***
  • Joined: Mar 2018
  • Posts: 46
  • Bike: Suzuki DL650 (2006), Honda PC800 (1989)
  • Location: Leamington Spa, Warwickshire
DL1000 front wheel non-ABS
« on: May 03, 2018, 12:20:18 »
You may have seen my post about front wheel problems with my DL650 - here is the cause!
The wheel itself is in good condition, it just does not fit a DL650 front end!

Paint is missing in a couple of small places. The bearings seem to be OK and the tyre held pressure. The valve core and cap are missing, somehow lost by the fitter who swapped my tyre over, but the valve body is OK.

I've advertised it on eBay at £150 with £15 delivery, but I would accept £130 plus delivery at cost from any forum member. The replacement wheel cost me quite a lot more than this.

Offline Andy52

  • Member
  • ***
  • Joined: Mar 2018
  • Posts: 46
  • Bike: Suzuki DL650 (2006), Honda PC800 (1989)
  • Location: Leamington Spa, Warwickshire
Re: DL1000 front wheel non-ABS
« Reply #1 on: July 14, 2018, 22:46:34 »
Now sold, via eBay