Suzuki V-Strom (VStrom) Owners Club DL250, DL650, DL1000 & DL1050
Market Place => For Sale (Bike related) => Topic started by: Hondaman on August 10, 2017, 13:51:53
-
Just a heads up, I have some bits for sale, all parts are from a 2013 650 glee but some parts may fit earlier vee's & wee's (please check for correct fitment)
Rough list is;
*Peg lowering kit (in black) £17
*Givi airflow (glee) £50
*Heed crash bars, no scrapes or damage, a little rust just starting in the corners of a couple of the welds. Bolts included £50
* Dark tint screen (powerbronze as I recall) £20
* Heated seat (aftermarket pad) these are utterly wonderful for anyone that rides all year! £40 plus exchange for your standard (and undamaged) seat and lh sidepanel (which has the lo/hi/off switch fitted)
*Complete as new rear wheel in original unmarked black paint, complete with brake disc, abs ring, good sprocket & carrier. No tyre £90
*De-cat original exhaust system, a bit more open & free'er reving than stock, undamaged £100
*DL1000 cartridge forks fitted to glee lowers ( will fit wee) very slight light pitting towards the end of travel but oil tight. These are a full set of forks ready to fit and are a marked improvement over stock 650 forks. I can build onto the original 1000 lowers ready to fit onto the earlier model DL1000. £120
*Nitron shock, complete with hydraulic preload adjuster, adjustable comp/rebound damping, adjustable length and slightly heavier spring from stock @ 10kg/mm (stock is 8.5kg). It is slightly longer than stock but lowering links to keep stock height are supplied. Will fit glee, wee & vee, a marked improvement in handling over stock - particularly when pressing on £350
Alll prices are collection (either Leigh nr Manchester WN7 or Saltburn nr Middlesbrough TS12 as I'm flitting between the two at the moment or will post at cost
Pics to follow,
Phil
-
I'd be interested in the Heed crash bars and possibly the Glee Airflow (will let you know tomorrow for this one)
-
Hi
Could I be first in the queue for the rear wheel and cartridge forks.
Cheers
Crazyhorse
-
Quite a response and thanks for the enquiries.
Crazyhorse, I'm not sure on postage on the wheel, as I'm sure you are aware, they are quite a bulky thing with a bit of weight with disc and carrier fitted.
I'm not home until late weekend so will have a better idea then when I can measure, weigh and get postage costs on the wheel, unless you are able to collect?
Regards Phil
-
if you could hold Nitron for me till September 25th it would be great, can pay holding deposit.
-
Yes, no worries.
Phil
-
Hi Hondaman
Thanks for your reply, I am in no hurry, and might be able to collect.
Let me know, what the postage might be though.
Thanks
Crazyhorse
-
Hi Phil,
I would also be interested in the shock providing it fits my DL650 2014. Should Sasquatch change his mind please let me know. I have cash ready and can collect anytime as I live in Bury Lancs. not far from you. BTW when was the Shock last serviced?
Thanks
Pino
-
Thanks for the interest, Sasquatch has first refusal but I'll get back if the sale doesn't happen for whatever reason.
The shock has only done around 6k - obviously works as it should with no leaks/scoring etc (one or two small marks from fitting) otherwise great condition.
Phil
-
I have just remembered, I have a set of PMR soft iuggage racks that I purchased little used from a forum member and unused by myself.
£50 (which is what I paid) collected or plus post.
-
PM's sent to those that have expressed an interest.
Phil
-
If the engine bars haven't sold - I'll have them!
Away at the moment and not back until 22nd, but will definitely have them :thumb:
-
Hi Doug, the engine bars are spoken for.
Regards Phil
-
are you going to the west Wales meet hondaman?
-
I'm afraid not Wayne, life is a bit too hectic at the moment for such forays (hence the rather unexpected sale of bike and it's bits :( )
-
Apologies for the slow response to some of the messages.
Most things are now spoken for, I'm waiting on a response on the peg lowering kit, other than that, parts still available are:
Givi Airflow AF 3101 for a glee
Dark tint screen (Powerbronze I think) glee again
Decat stock exhaust great condition, try before it, if you don't like it, I'll give your money back (collection only)
I also have a new Renthal 16t front sprocket fits DL650/1000, Triumphs, gixxers etc etc £12 (plus post)
Cheers Phil
-
Peg lowering kit still available
-
^^an excellent addition for the taller rider... made a big difference for me and I'm just 6ft
-
How easy is it to fit?
-
I managed so anyone can :lala:
-
Same here! Took a few photos of original set up to refer back to just in case!! But didn't need to. :thumb:
Less than an hour, start to finish. :thumb:
Seems to have made a difference, I'm not one of the tall ones @ 5' 10 (& a bit) but had been having trouble with an aching hip after 30-45 mins riding. Not cured it but feels easier & now manage an hour plus before the leg comes off the peg for a stretch! :icon_wink:
-
https://www.youtube.com/watch?v=CD1dUaJBHKc&app=desktop
-
As above, easy enough. 4 bolts each side for reassembly and an extension piece for the gear adjuster and brake adjuster rod.
Phil
-
I'll have the Givi Airflow AF 3101 if it's still available?
I'm in southport/charnock Richard so can collect (when I'm back from holiday - after 22nd)
Cheers :thumb:
-
Cool, just give me a shout when it's good for you Doug.
Phil
-
I should be able to get over to Leigh on either the 24th or 25th. Let me know which is best for you....
-
Dark Powerbronze screen £15, Modded/decatted stock exhaust for glee £80 (prefer collection!), very tidy/straight, not excessively noisy but quite a bit more characterful than stock.
16t Renthal sprocket, new in packet, £10
still available.
I also have a Givi Tank lock ring and fitting kits for vee/wee or Glee (which are different) £10 for tank ring and fitting kit, £5 for the fitting kit alone.
Phil
-
The clear out is nearing completion!
Renthal 16t front sprocket, brand new for vee/wee/glee, Triumphs etc £16 plus post
OE glee exhaust that has been decatted for a bit more vvvrrrooommm! - no dings or scratches, good clamps, complete with headers - Got to be worth £60 (collected)
Givi T449 semi rigid throwover panniers, hardly used complete with waterproof covers, I think they are 35ltr each when expanded £25 plus post.
cheers Phil
-
PM Sent Phil :thumb:
-
Pm's replied to re panniers.
Phil
-
hello would be interested in exhaust. I am in Keighley west yorks. where are you. thanks Graham.
-
PM'd you Graham
-
By a strange twist of fate the panniers are still available
-
Hi Hondaman
Is the footrest lowering kit still available?
If so, is it a proprietary kit eg Cymarc or SW-Motech, that provide c25mm lower and c5mm forwards?
Aldi
-
Hi Aldi, the footpeg lowering kit is sold.
Regards Phil
-
Hi Phil Thanks for letting me know Aldi
-
Hello there,
is the tinted powerbronze screen for the Glee still available?
Thanks.
-
I've got the screen now :shy:
-
Still available:
Givi semi rigid panniers
Givi Tank lock tank bag & BF01 fitting kit (glee etc)
Decatted glee exhaust.
Cheers Phil
-
Hi, do you have a bag for sale also or is it just the fitting kit?
-
Bag and fitting kit (for glee & other newer Suzuki's, BF01 I think it is)
Phil
-
Panniers and Tanklock bag now sold.
Decatted exhaust & new Renthal 16t front sprocket still available.
Phil
-
Forty quid for an oe glee system that's been decatted & modded baffles anyone?
-
Hi I would like to buy the exhaust but can't get up to pick it up for a week or two.
regards Jim
-
I've sent you a pm Jim
-
Received my shock a month ago, thanks Phil for holding it for me.
Shock transformed my bike from squatting duck into real corner muncher. Went out for test ride a month ago and just got back :grin: its so good!! Best upgrade ever!!!
-
Glad to hear that you are pleased with the upgrade, the quality and finish of these shocks are superb :thumb:
Now all you need are some Intiminators for the front.....
-
Now all you need are some Intiminators for the front.....
Spotted your sale post ;) thinking about it :smirk:
edit
been thinking way too long :(