Author Topic: Unacceptable? (Read 4687 times)

Holmsey · « **Reply #20 on:** March 29, 2019, 17:43:29 »

Quote from: kwackboy on March 29, 2019, 13:07:32

I hope when you fit mine it will be done properly

Ianmc · « **Reply #21 on:** March 29, 2019, 18:31:41 »

Works absolutely fine with my hand guards,I have fitted a few sets now.The secret is,make sure everything fits spot on without glue,mark the correct position with a pencil and then apply the glue and fit the grip to the pencil mark then LEAVE THEM WHERE THEY ARE UNTIL THE GLUE HAS SET.

Willie Fawcett · « **Reply #22 on:** March 30, 2019, 21:08:37 »

This is how I installed my grips 25000 miles ago & they have worked perfectly .

kwackboy · « **Reply #23 on:** March 30, 2019, 22:05:53 »

Quote from: Holmsey on March 29, 2019, 17:43:29

I hope when you fit mine it will be done properly

Your police discount will reflect on my level of workmanship ..

TLPower · « **Reply #24 on:** March 31, 2019, 06:27:50 »

I thought as much, shady dealings in the smoke...

Rusty Nuts · « **Reply #25 on:** March 31, 2019, 07:38:35 »

Completely unacceptable!

Who the hell shoots video in vertical/portrait ?

NTBooth · « **Reply #26 on:** April 01, 2019, 16:10:13 »

cheers suzukiste - ill head over that way and check them out, I drive through hyde every day to work.

I've had heated grips on every one of my bikes and had hanguards on all but 1 of them. No issues with fitment at all - their excuse was, and is bullshit.

Holmsey · « **Reply #27 on:** April 01, 2019, 18:55:38 »

Quote from: kwackboy on March 30, 2019, 22:05:53

Your police discount will reflect on my level of workmanship ..

Your speeding ticket has been misplaced....

Holmsey · « **Reply #28 on:** April 01, 2019, 18:56:16 »

kwackboy · « **Reply #29 on:** April 01, 2019, 19:28:03 »

Which one ?

.

pichulec · « **Reply #30 on:** April 01, 2019, 20:08:20 »

This is how I fitted mine. That's how it should be done. Muppets working there...

Darreng586 · « **Reply #31 on:** April 11, 2019, 21:00:28 »

What was the Recall for ?

NTBooth · « **Reply #32 on:** April 13, 2019, 06:17:12 »

recall was for an o-ring on the fuel pump apparently.

Bit of an update, after taking it back in it was promptly sorted.

Still not 100% happy with it though as the way they have positioned it means the cable now sits in front of the starter switch and I have to move the grip to press it. A minor issue.
The control box is on the right side and I would have preferred the left.

These above are issues that I can live with and to me are not worth letting them touch my bike again for.

pichulec · « **Reply #33 on:** April 14, 2019, 20:26:00 »

Look at my cable, that's how it should be fitted. My cable doesn't obstruct the starter switch at all.

Rusty Nuts · « **Reply #34 on:** April 14, 2019, 20:45:34 »

Yes, that is how it should be. Not obscuring anything, not fouling on anything, not restricting the range of throttle movement. Mine is like that, with handguards also.

Asmith61 · « **Reply #35 on:** April 14, 2019, 20:57:51 »

Yes and mine too no problems at all

NTBooth · « **Reply #36 on:** April 16, 2019, 09:14:02 »

Your replies make it seem as though I don't already know this...
I'm well aware of how they're supposed to be fitted!

At this point though, I can't tell if its incompetence or done on purpose to annoy me and like I said, I have no intention of letting them ever touch my bike again

Rusty Nuts · « **Reply #37 on:** April 16, 2019, 09:59:03 »

I wasn't explaining , Niall, just agreeing with you. ( Mind you, the thread title was a question.

)

NTBooth · « **Reply #38 on:** April 16, 2019, 10:20:53 »

you're a question

NTBooth · « **Reply #39 on:** April 16, 2019, 10:22:08 »

I see your point, Maybe I should have gone for different punctuation (!) Next time.