Author Topic: Oxford heated grips  (Read 198 times)

0 Members and 1 Guest are viewing this topic.

Offline robbie

  • Member
  • ***
  • Joined: Dec 2015
  • Posts: 16
  • Bike: DL1000
  • Location: Warwickshire
Oxford heated grips
« on: January 07, 2022, 14:54:21 »
Hello can anyone advise me if there is a spare plug on the existing wiring loom to plug the heated grips into for my 2015, 1000 vstrom many thanks.

Offline Gert

  • Member
  • ***
  • Joined: Sep 2015
  • Posts: 1497
  • Bike: DL650 K5 Blue, DL650 K6 Red
  • Location: South Africa
Re: Oxford heated grips
« Reply #1 on: January 08, 2022, 07:40:46 »
If I recall, there should be a heated grip connector above the radiator. I would suggest that you have a look at the downloads section (https://www.v-strom.co.uk/downloads.htm) for the  Suzuki V-Strom DL1000A L4 on Workshop Manual. Hopefully you will find the answer to your question in locating the heated grip connector.

Offline Mojo-Jojo

  • Member
  • ***
  • Joined: Nov 2021
  • Posts: 4
  • Bike: DL1000GT K6
  • Location: Nottingham
Re: Oxford heated grips
« Reply #2 on: January 08, 2022, 13:54:22 »
As Gert said, behind the radiator (green plug, if I remember correctly).
I recently switched my stock heated grips for the Oxford ones, cut off the original plug from the old grips and solder the new grips wiring to this, making sure the polarity is correct, and heatshrink over the new solder joint.

Offline robbie

  • Member
  • ***
  • Joined: Dec 2015
  • Posts: 16
  • Bike: DL1000
  • Location: Warwickshire
Re: Oxford heated grips
« Reply #3 on: January 08, 2022, 17:55:59 »
Many thanks Mojo And Gert