Update
As I find it difficult to get my 2023 1050 onto the centre stand , I decided to make a modification to help.
Looking at it , I realised it needed more leverage, more leverage you have the easier the task. I only ever use the centre stand in my garage so the lever needed to be detachable for normal road use.
So to add more leverage onto the centre stand, I had 2 metal U shape brackets welded to the stand, I then insert a 12 inch long metal pipe into the brackets giving me some extra leverage.
To get the bike up onto the stand it's a slightly different technique, as the leverage bar is a bit vertical ,you have to push it backwards ,then down with your foot.
The attached photos and video will help .
Note
This modification is for workshop use only, riding the bike with the leverage bar installed would be dangerous. It's important the quality of the metal materials used and the welding are adequate to handle the weight and extra stresses involved.
As the point you place your foot has moved back and more importantly away from the centre of gravity it affects the balance of the bike when lifting the bike.
Sorry for the above but wouldn't want anyone injured or bike damage due to improper use or poor quality material used. I recommend if you do decide to copy the modification the first time you trial and test it, you have assistance to steady the bike in case you over balance or your materials fail.