Please
login
or
register
.
News:
Don't forget the Forum has a Calendar function, add your Rides/Meets so all can see.
Home
Help
Login
Register
Suzuki V-Strom (VStrom) Owners Club DL250, DL650, DL1000 & DL1050
»
Oily Rag - Dedicated to Pat, Greywolf. 26/06/45 - 04/06/18
»
Exhausts
»
Exhaust clamp size 650 2010
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Exhaust clamp size 650 2010 (Read 1624 times)
0 Members and 1 Guest are viewing this topic.
Moggy
Member
Joined: Jun 2022
Posts: 31
Bike: DL650 L0
Location: HULL, EAST YORKSHIRE THE OTHER END OF THE M62 AND A BIT FURTHER
Exhaust clamp size 650 2010
«
on:
June 13, 2022, 22:04:20 »
Hi does anyone know what size front exhaust clamp size 650 2010 noticed when I got home mine looked loose touched it fell off corroded on inside edge measuring calipers are at work. Was going to order one up on ebay thanks in advance 👍
Logged
Gert
Member
Joined: Sep 2015
Posts: 2251
Bike: DL650 K5 Blue, DL650 K6 Red
Location: South Africa
Re: Exhaust clamp size 650 2010
«
Reply #1 on:
June 16, 2022, 14:56:00 »
How are you getting on with the exhaust clamp hunt?
Have you perhaps tried any of the local motorcar exhaust replacement centers near you? I would think that a stainless steel exhaust clamp shouldn't be that difficult to source.
Logged
Rusty Nuts
Manufacturer of iron oxide
Member
Joined: Jun 2012
Posts: 7766
Bike: KTM 1090 in orange, of course.
Location: Traitors Corner & West Yorkshire
Re: Exhaust clamp size 650 2010
«
Reply #2 on:
June 16, 2022, 15:32:54 »
Just seen this. I may have one in my shed. Will rummage later.
Logged
Rusty Nuts
Manufacturer of iron oxide
Member
Joined: Jun 2012
Posts: 7766
Bike: KTM 1090 in orange, of course.
Location: Traitors Corner & West Yorkshire
Re: Exhaust clamp size 650 2010
«
Reply #3 on:
June 16, 2022, 16:09:18 »
Rummaging achieved. The only clamp I have is a Mikkalor, marked up as 43-47. I'm sure I bought a pair when I had the glee, this must be the unused one. Does the size sound right?
Logged
UK_Vstrom650
Member
Joined: Jun 2012
Posts: 6604
Bike: DL650A L2
Re: Exhaust clamp size 650 2010
«
Reply #4 on:
June 16, 2022, 21:36:23 »
Sounds about right Rusty. I remember posting the size I 'What have you done with your V-Strom today' thread but couldn't find the post via search, but 45mm seemed to spring to mind.
Logged
Avoid RevIt Poseidon GTX jacket
🏍
Moggy
Member
Joined: Jun 2022
Posts: 31
Bike: DL650 L0
Location: HULL, EAST YORKSHIRE THE OTHER END OF THE M62 AND A BIT FURTHER
Re: Exhaust clamp size 650 2010
«
Reply #5 on:
June 18, 2022, 10:41:35 »
Thanks not been back on to check back took a guess at 40 43 mm just tried it too small measured with verniers it's more 45mm like you said thanks for reply back on to ebay for a clamp I guess. 🙄
Logged
Moggy
Member
Joined: Jun 2022
Posts: 31
Bike: DL650 L0
Location: HULL, EAST YORKSHIRE THE OTHER END OF THE M62 AND A BIT FURTHER
Re: Exhaust clamp size 650 2010
«
Reply #6 on:
June 18, 2022, 10:48:52 »
Just ordered a mikalor one stainless steel should be here early next week was going to have a ride around local exhaust places but probably easier to order online as local thick fit will probably want to sell me a full system for a range rover.
Logged
Moggy
Member
Joined: Jun 2022
Posts: 31
Bike: DL650 L0
Location: HULL, EAST YORKSHIRE THE OTHER END OF THE M62 AND A BIT FURTHER
Re: Exhaust clamp size 650 2010
«
Reply #7 on:
June 23, 2022, 20:45:45 »
You was right rusty nuts 43-47mm fits like a glove on a chickens head all sorted now thanks for help blokes.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Suzuki V-Strom (VStrom) Owners Club DL250, DL650, DL1000 & DL1050
»
Oily Rag - Dedicated to Pat, Greywolf. 26/06/45 - 04/06/18
»
Exhausts
»
Exhaust clamp size 650 2010