Suzuki V-Strom (VStrom) Owners Club DL250, DL650, DL1000 & DL1050

Oily Rag - Dedicated to Pat, Greywolf. 26/06/45 - 04/06/18 => Tyres => Topic started by: Colin sharp on February 22, 2018, 19:31:48

Title: Engine management light come on after puncture
Post by: Colin sharp on February 22, 2018, 19:31:48

Hi there can anyone help had a puncture today took it to be fixed which they did .but on way home engine management light came on .but bike feels OK . So the only thing is rear wheel been off .how can I turn it off .cheers colin

Title: Re: Engine management light come on after puncture
Post by: SuzukiSte on February 22, 2018, 19:36:17

Are you sure its not the ABS Light if the wheel as been off.

Title: Re: Engine management light come on after puncture
Post by: Colin sharp on February 22, 2018, 20:19:23

No mate definitely engine management light

Title: Re: Engine management light come on after puncture
Post by: greywolf on February 22, 2018, 20:52:13

Are you seeing a check engine symbol or an FI light/symbol? What model year or build month/year, not registration year, is the bike?

Title: Re: Engine management light come on after puncture
Post by: kwackboy on February 22, 2018, 20:53:42

Does your XT have tyre pressure sensors or traction control .?  It's possible either the rear abs ring might have been damaged/distorted or the pressure sensors (if you have them) may have also been damaged.
Other than that you can use the diagnostic plug to bring a fault code up which will give you the answer.

Title: Re: Engine management light come on after puncture
Post by: paulja on March 02, 2018, 22:25:32

It can only be the ABS\ Tracation control, so maybe pull the ABS fuse, turn the bike on, then off, then put the fuse back in and see if it resets. Failing that you'll need to get the bike into 'Dealer Mode' to read the actual error code.