Author Topic: O2 sensor thread size  (Read 2167 times)

0 Members and 1 Guest are viewing this topic.

Offline wurzel

  • Member
  • ***
  • Joined: Jul 2015
  • Posts: 2534
  • Bike: DL1000 L4
  • Location: Maldon, Essex
O2 sensor thread size
« on: June 08, 2017, 17:19:06 »
Just so you know,  in case you want a plug to replace the sensor, it's 12mm fine thread, 12 to 14mm long.

Offline Relevant11

  • Member
  • ***
  • Joined: Sep 2014
  • Posts: 244
  • Bike: Dl1000L4. KTM XCF 350, Royal Enfield interceptor 650( yes they are as good as they say)
  • Location: 100 acre wood
Re: O2 sensor thread size
« Reply #1 on: October 27, 2018, 19:16:52 »
Where did you end up acquiring said plug in the end Wurzel?

Offline wurzel

  • Member
  • ***
  • Joined: Jul 2015
  • Posts: 2534
  • Bike: DL1000 L4
  • Location: Maldon, Essex
Re: O2 sensor thread size
« Reply #2 on: October 28, 2018, 01:02:35 »
  I measured mine which are not fitted,as I was replacing with bolts.
The plugs are somewhere hurried in my shed now, I think...
If you need one I can make an attempt to find them.

Offline Relevant11

  • Member
  • ***
  • Joined: Sep 2014
  • Posts: 244
  • Bike: Dl1000L4. KTM XCF 350, Royal Enfield interceptor 650( yes they are as good as they say)
  • Location: 100 acre wood
Re: O2 sensor thread size
« Reply #3 on: October 28, 2018, 20:54:09 »
Many thanks for the offer  but I’ve gone down the bolt route too, got a way to go yet , the old exhaust system  is off but I decided to strip suspension linkage whilst I was in there, all v reasonable with a fair amount of Suzuki grease still present !

Offline wurzel

  • Member
  • ***
  • Joined: Jul 2015
  • Posts: 2534
  • Bike: DL1000 L4
  • Location: Maldon, Essex
Re: O2 sensor thread size
« Reply #4 on: October 28, 2018, 22:18:06 »
Bolt and copper washer,way to go.
Good news on the Suzuki grease, they must have been feeling generous when they put yours together... :)